Large LED display is commonly used in enterprises and institutions information display window, in real life is playing an increasingly large role. The latest synchronous LED display and LED display requires early computer-controlled, if not the day display, you need to switch on the computer every day regularly. And early LED display to prevent runaway damage in the absence of signal, you need to turn on the computer after turning on the LED display, LED display again to close off the computer. This requires arrange for staff.

How can I make things simple, unattended displays servo it? To solve this problem is to solve paternity suits PC Switcher, including: daily fixed automatically boot, boot automatically displays the file and fixed shutdown day method is as follows:

A daily fixed automatically boot

General settings directly in the BIOS

Step 1: Start LED display servo computer, press DEL, enter the BIOS, then select the "P OWER MANAG EMENTF EATURES (power management settings)", enter into. Found in the power window "RESTOREONAC / POWERLOSS" item, press Enter, and then set its value to key "P OWE RON" By direction;

Step 2: Select "RESUME ONRTC ALARM" and press Enter, then key set its value to "ENABLE" By direction; Step 3: Select the "RTC ALARMDATE" press Enter, and then set its value to "EVERYDAY", indicates the same operations are performed daily. In the same way, were the "RTC ALARM HOURS", "RTCALA RM MI NUT E", "RTM ALARM SECOND" is set to "07", "55", "00", which means the boot time of the morning "7:55 : 00 ", all set up, press F10, save and restart.

Because different motherboard's BIOS is not the same, some motherboard settings may have a little different from the above, but just remember to find the "WAKE UP" or in power management "Resume byAlarm" the words on the list, because it is set up boot time option.

Second, the boot automatically display information file

You can use a shortcut

Step 1: Show file associated with the display program. For example, display files are "common .led", open its program is "LED.exe", simply right-click on the "common. Led" icon, click "Properties" in the "General" tab click on the "Change" button, find the program "LED.exe", click "OK" on it.

Step 2: Create a shortcut to the file is displayed. Right-click on the "Common .led" icon, click the "Create Shortcut", the emergence of a "shortcut to commonly .led" icon, and then in the lower left corner of the computer screen click on "Start" and "Run" and "browse" find "shortcuts to commonly used .led" file and confirm. Copy the "Open" column appears "" ...... shortcuts to commonly used .led.lnk "". Note: If you click "OK", you can directly open the Show Files "Common .led".

Step 3: Set the startup items in the super-rabbits. Super rabbit software downloaded from the Internet outside, and installed LED display servo computer, open the "rabbit tool" in the "magic set - to create their own system" in the "Startup Programs" right-click and select "New Project" , paste the "Command Line" in the "D: LED shortcuts to commonly used .led.lnk", heading his own set.

This setting, open the opportunity to run automatically displays the file "common .led", with hand-open "Common .led" is the same effect.